National Instruments AT-GPIB/TNT High-Performance ISA GPIB Interface Card

Description

National Instruments AT-GPIB/TNT High-Performance ISA GPIB Interface Card
Comes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from National Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
These units are used and guaranteed to work.
Key Features:
Software compatibility with all previous versions of AT-GPIB
Choice of three 16-bit DMA channels
Jumper-selectable hardware features
8-bit slot compatibility with DMA disabled
Description:
The NI AT-GPIB/TNT is a high-performance IEEE 488 interface for PCs with ISA slots. The NI TNT4882C ASIC makes the AT-GPIB/TNT a maximum-performance IEEE 488.2 interface and performs the basic IEEE 488 Talker, Listener, and Controller functions required by the most recent GPIB specification (488.2). The AT-GPIB/TNT can sustain data transfer rates greater than 1.5 Mb/s (488.1) and implements the high-speed GPIB protocol (HS488) for greater transfer rates.
There are two versions of the AT-GPIB/TNT: the AT-GPIB/TNT (Plug and Play), which features a jumperless configuration, and the legacy AT-GPIB/TNT, which uses DIP switches and jumpers to configure the interface. Both interfaces contain identical GPIB interface functionality.
Specifications:
IEEE 488 Compatibility:
IEEE 488.1 and IEEE 488.2 compatible
Maximum IEEE 488 Bus Transfer Rates*:
IEEE 488 Interlocked Handshake:
1.5 Mbytes/s
IEEE 488 Non-Interlocked (HS488) Handshake:
1.6 Mbytes/s
Power Requirement from ISA I/O Channel (+5 VDC):
AT-GPIB/TNT (Legacy):
50 mA typical, 100 mA maximum
Electrostatic Discharge Protection (GPIB I/O Pins):
By Mil 883C Section 3015C:
1,500 V
Physical:
Dimensions:
10.7 cm x 16.5 cm (4.2" x 6.5")
I/O Connector:
IEEE 488 standard 24 pin
Operating Environment:
Ambient Temperature:
0 to 55°C
Relative Humidity:
10 to 90%, non-condensing
Storage Environment:
Ambient Temperature:
-20 to 70°C
Relative Humidity:
5 to 95%, non-condensing
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a {{detail_product_description}}.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
05/19/15