NEW National Instruments NI AT-GPIB/TNT High-Performance ISA GPIB Interface Card

Description

NEW National Instruments NI AT-GPIB/TNT High-Performance ISA GPIB Interface Card
Comes with what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from National Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit is new, old stock surplus. It comes with a 2M GPIB cable.
Information from the Box:
Part Number:
777154-51
Hardware Serial Number:
A109AD
Description:
AT-GPIB/TNT (PNP), NI-488, 2M for WIN95, 2M
Features:
Completely IEEE 488.2 compatible
FIFO to decouple GPIB transfers from ISA bus transfers
16-bit ISA bus interface
Maximum Transfer rates (Windows) of More than 1.5 Mbytes/s (IEEE 488.1) and More than 1.6 Mbytes/s (HS488)
8-bit slot compatible with DMA disabled
Automatic software configuration of I/O base address, interrupt level, and DMA channel
Choice of at least seven interrupt lines and three 16-bit DMA channels
Description:
The National Instruments AT-GPIB/TNT is a high-performance IEEE 488 interface for PCs with ISA slots. An NI TNT family ASIC makes the AT-GPIB/TNT a maximum-performance IEEE 488.2 interface board. The TNT ASIC performs the basic IEEE 488 Talker, Listener, and Controller functions required by the most recent GPIB specification, IEEE 488.2. The AT-GPIB/TNT can sustain data transfer rates greater than 1.5 Mbytes/s using the IEEE 488.1 3-wire handshake. The AT-GPIB/TNT also implements the high-speed GPIB protocol (HS488).
AT-GPIB/TNT (Plug and Play) Description:
The AT-GPIB/TNT (Plug and Play) is jumperless and contains all circuitry needed for Plug and Play compatibility. Plug and Play systems automatically allocate the interface hardware resources (I/O address, DMA channel, and interrupt level) at startup. For non Plug and Play systems running DOS or Windows, the National Instruments NI-PNP utility configures the hardware resources.
Specifications:
IEEE 488 Compatibility:
IEEE 488.1 and IEEE 488.2 compatible
Maximum IEEE 488 Bus Transfer Rates (Actual rates depend on system configuration and instrument capabilities.):
IEEE 488 Interlocked Handshake:
1.5 Mbytes/s
IEEE 488 Non-Interlocked (HS488) Handshake:
1.6 Mbytes/s
GPIB Analyzer Performance:
Sampling Rate:
20 MHz
Timestamp Resolution:
50 ns
Power Requirement from ISA I/O Channel:
+5 VDC, 120 mA typical, 240 mA maximum
Electrostatic Discharge Protection (GPIB I/O Pins):
By Mil 883C Section 3015C - 1,500 V
Physical:
Dimensions:
10.7 cm x 16.5 cm (4.2" x 6.5")
I/O Connector:
IEEE 488 standard 24 pin
Operating Environment:
Ambient Temperature:
0°C to 55°C
Relative Humidity:
10% to 90%, non-condensing
Storage Environment:
Ambient Temperature:
-20°C to 70°C
Relative Humidity:
5% to 95%, non-condensing
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
11/02/21