XADO EX120 REVITALIZANT for power steering booster

Description

Hello! You are welcome at BEST GOODS FROM UKRAINE Store!
Here is 1 syringe 8 ml XADO EX 120 revitalizant for power steering booster
restoration with reinforced formula (revitalization factor 120)!
THIS IS A NEW XADO PRODUCT
BEWARE OF FAKE!!!
XADO – is unique and the only one technology in the world of repair without dissection of machines, assemblies and engines. This technology allows restoring them during their standard usage.
Most important part of XADO technology is discovery of REVITALIZATION process which not only dramatically changed conceptions about repair in traditional meaning, but opened new facilities in using of machines and engines.
How usual occurs wear?
Here is schematic picture of defect of friction plain. In this case it is scratch along axes of surfaces moving.
Look: selected zone is zone of anomalous surface activity.
XADO technology restores the surface of machines and engines by uses energy of friction and makes rebonding by creating cermet layer. XADO revitalizants contain building material for future surface and unique energetic activator which allows transfer redundant friction energy into creation of new crystal lattice – new surface.
How it happens:
Revitalization starts in overloaded zone (zone of maximal wear), because here is enough energy to start a new process and metal atoms have biggest amount of free (noncompensated) bonds.
This bonds, like a magnets, catch and attract building material right into zones of maximal wear. Energetic activator directs redundant energy on building of new crystal lattice. Thereby new covering appears on old surface.
In a few minutes after revitalization start on wear place appears cermet (metal and ceramic) patch. Zone of anomalous activity vanishes. Energetic processes stop and growing of surfaces stops. In the same time happens diffusion of metal and cermet. Diffusion ends process of forming new surface, and destroy defect by cementing.
How regulates surface growing?
If we look on every detail through microscope, we will see, that even the smoothest surface seems uneven. It looks like chain of peaks and hollows.
Step by step metal atoms from “week places” being knocked out by wear and become chipping. Hollows deeps more and more.
Some people thinks, that 100% wear becomes when whole detail becomes into dust, but it is mistake. Total wear happens when peaks become obliterated.
But until this peaks exist there is a possibility to restore detail by revitalization. Because this peaks “remember” primary sizes of detail. By the way, from this follows that detail never will be more than primary size, because when hollow comes abreast with peak, conditions for revitalization disappears. Building material which wasn’t used is ready for building in any time when will appear zone of anomalous activity (wear).
Reinforced revitalizant.
The product is designed to protect against wear, restore and repair a power steering booster and other hydraulic equipment. Due to its by 20% greater* active agent’s concentration, it offers strong restoration potential to the worn out surfaces and wear protection.
*compared to XADO gel-revitalizant for power steering pumps
During treatment of the hydraulic units the product forms a protective metal-ceramic coating on the surfaces of the titling and actuating mechanisms and switchgears (valve spindles). As a result, the operation characteristics of the hydraulic equipment are restored.
Technical information
Application instructions:
Treatment of engine fuel equipment with capacity of up to 5 L
1.
Treatment of a unit with 1 -2 L hydraulic system capacity
Introduce (spray) the contents of a tube (can)* in the fluid, which is warmed up to the operating temperature, in the tank of a power steering pump
After the revitalizant is applied and the engine is turned on, wait 2-3 minutes and turn the steering wheel for 5 minutes
Revitalization is considered complete after the mechanism has been in operation for 50 hours ( 950 miles of run)
* It is recommended preliminary to dissolve the contents of the can (tube) in small amount (~ 50 ml) of used hydraulic fluid. If the fluid in the tank of a power steering pump is contaminated (opaque or has change its initial color etc.), it is recommended to change hydraulic fluid before application.
Dosage:
Oil system capacity
, L
1-2
2-5
5-8
Number of syringes (8 ml), pcs
1
2
3
Treatment procedure
single
single
single
Note:
It
The typical sign of the beginning of revitalization process is the noticeable improvement in the steering mechanism operation (decreased steering effort, improved precision of operation, reduced noise level) from the very first kilometers of run. If there are no improvements in the power steering operations noticed after 60-120 miles of run, you are most likely dealing with inaccurate diagnostics.
PACKAGE: 1 SYRINGE, 8ml
Payment PayPal
Delivery: Ukraine Air Mail 10-17 working days.
Shipping within 48 hours after payment.
Please, visit my store