XADO Revitalizant EX120 for power steering and hydraulic equipment

Description

Revitalizant EX120 for power steering and hydraulic equipment
It is intended for protection against operation and repair of the power steering and other hydraulic equipment. During the processing of hydraulic units forms a protective metal-ceramic coating on the surfaces of pumping parts, actuators and distributors (spools). As a result, the performance of hydraulic equipment is restored.
- Eliminates pump howling caused by operation
- Reduces steering effort
- Increases the clarity of the power steering after 50-100 km after use
- Reduces noise and vibration of the hydraulic pump
- Protects parts from operation at low oil levels.
Application
- The required amount of the tool is pre-dissolved * in 30-50 ml of hydraulic fluid heated to a temperature not lower than +35 ° C
- The resulting mixture is added to the heated to operating temperature fluid in the tank of the power steering
- After adding the composition with the engine running after 2-3 minutes, turn the steering wheel for 5 minutes
* Before using the tool, you should replace the fluid in the power steering and drive at least 200 km:
- if the liquid is contaminated (opaque, changed the initial color, etc.)
- the fluid has worked more than 40,000 km (more than 3 years) or its service life is unknown.
Notes
A characteristic feature of the beginning of revitalization is the improvement in the operation of the steering mechanism (reduction of steering effort, clarity of work, noise reduction) from the first kilometers after processing.
Dosage:
Hydraulic system volume (l)
1-2
2-5
5-8
Number of syringes (8 ml), pcs.
1
2
3
Processing scheme
Once
Once
Once
Packaging
syringe in a box of 8 ml, article
XA 12032